Skip to content

How to order Roof Measurements for Shingle Warranty Claims

How to order Roof Measurements for Shingle Warranty Claims

Roof-measurements-for-Shingle-Warrant Claims

Are you experiencing problems with your roof shingles? Worried about the warranty coverage and how to file a claim? Look no further! In this comprehensive guide, we will walk you through the process of ordering roof measurements for shingle warranty claims. We’ll also provide valuable insights on identifying defective shingles, determining if the issue is due to a manufacturer’s defect or improper installation, and protecting your warranty. So grab a cup of coffee and let’s dive into the world of roof warranties and claims!

How to Order Roof Measurements for Shingle Warranty Claims (Premium Report Details)

When it comes to filing a shingle warranty claim, accurate roof measurements are essential. They provide crucial information about the size and scope of the problem, helping you navigate the claims process smoothly.

To order roof measurements for your warranty claim, consider obtaining a premium report from a reputable roofing measurement service. These reports offer detailed data on your roof’s dimensions and can be invaluable in supporting your case with the manufacturer.

To get started, simply provide the address of your property and any additional details required by the measurement service. They will then use satellite imagery or other advanced technologies to gather precise measurements of your entire roof.

Once you receive the premium report, carefully review all the provided information. Take note of any discrepancies or inconsistencies that may affect your claim. It’s always wise to consult with a professional roofing contractor who can help interpret and validate these measurements.

Remember, accuracy is key when ordering roof measurements for shingle warranty claims. By investing in a reliable premium report, you’ll have solid evidence to back up your case and increase your chances of receiving proper compensation for any issues with your shingles.

Roof Shingle Warranty Claim Procedures: Where & How to Report a Failing Roof

Roof-measurements-for-Shingle-Warrant Claims

When you notice that your roof shingles are failing and need replacement, it’s essential to understand the warranty claim procedures. Reporting a failing roof can be a daunting task, but with the right information, it becomes much easier.

Locate your warranty documentation and review its terms and conditions. This will provide you with important details on how to proceed with your claim. The warranty should specify where to report any issues or defects in your shingles.

Typically, manufacturers require homeowners to report problems directly to them or their authorized representatives. It is crucial not to delay reporting as some warranties have strict timelines for filing claims.

To report a failing roof, gather all the relevant information about your roofing system such as purchase date, type of shingle used, and proof of installation by a certified professional. These details will help expedite the claims process.

Next, contact the manufacturer or their designated representative through their preferred communication channels provided in the warranty documentation. Be prepared to provide clear and concise explanations regarding why you believe there is an issue with your shingles.

Additionally, document any visible signs of damage or defects with photographs if possible. Visual evidence can strengthen your case when presenting it for inspection during the claims process.

Remember that each manufacturer may have specific procedures for handling warranty claims. Follow their instructions carefully and keep detailed records of all interactions throughout this process.

By following these steps diligently, you increase your chances of having a successful warranty claim for your failing roof shingles without unnecessary delays or complications. Don’t hesitate to reach out for assistance from professionals if needed!

Stay tuned! In our next section, we discuss how to identify defective shingles so that you can determine whether they were caused by the manufacturer’s defect or improper installation!

How to Identify Defective Shingles


Identifying defective shingles on your roof is a crucial step in ensuring that you can take advantage of your roofing warranty if needed. Here’s a detailed guide on how to identify defective shingles:

Inspect for Cracks and Splits: Look for cracks or splits on the surface of your shingles. These can be indicators of damage, and if present, it’s essential to address them promptly.

Examine for Bald Spots: Bald spots on shingles, where granules have worn away, are concerning. While some granule loss is normal over time, extensive bald spots suggest potential defects.

Check for Curling Shingles: Shingles with curled edges can be a sign of issues. While slight curling may be expected with age, significant or uneven curling could indicate problems.

Evaluate the Condition of the Shingles: Assess the overall condition of the shingles. If they appear severely worn, damaged, or deteriorated, it’s a clear indication of a problem.

Look for Blistering: Blisters on shingles can be a sign of manufacturing defects. These blisters may lead to premature failure of the shingles.

Inspect for Delamination: Delamination is when the layers of a shingle separate. If you notice layers peeling apart, it’s a definite concern.

Observe for Damaged Surface Texture: Damaged surface texture, such as chipped or eroded areas, can be a clear sign of defects in the shingles.

Assess the Severity of Curling at Edges: While minor curling at the edges may be expected, pay attention to the degree of curling. Severe curling can compromise the shingles’ performance.

Note Any Unusual Discoloration: Unusual discoloration that doesn’t correspond to normal weathering or aging can indicate defects. Keep an eye out for atypical color changes.

Check for Loss of Granules: Excessive granule loss, leaving the shingles exposed, is a clear sign of shingle problems. It can lead to reduced protection and a shorter lifespan.

Investigate for Buckling: Buckling occurs when shingles appear wavy or misshapen. This can be a result of manufacturing or installation issues.

Examine for Manufacturer Labeling: Check if your shingles have manufacturer labeling. These labels often contain essential information that can help identify the shingles and their expected lifespan.

Look for Manufacturer-Reported Defects: Research whether the shingle manufacturer has reported any defects or recalls related to your specific shingle product.

Consult a Roofing Professional: If you are uncertain about the condition of your shingles or suspect defects, it’s advisable to consult a roofing professional. They can provide expert assessment and guidance.

Identifying defective shingles promptly is vital for addressing potential issues and potentially making a warranty claim. Regular roof inspections and attention to the details mentioned above can help you maintain the integrity of your roofing system.

How To Determine If The Problem Was Caused By A Manufacturer’s Defect Or Improper Installation

Determining the cause of a roof problem can be a tricky task. It requires careful evaluation and analysis to determine whether the issue is due to a manufacturer’s defect or improper installation. Here are some steps you can take to make this determination.

First, it’s important to assess the nature of the problem. Look for any signs that may indicate a manufacturing defect, such as premature shingle failure or widespread issues across your roof. If the problem seems isolated or localized, it could be an indication of improper installation.

Next, consider when the issue first arose. If problems began shortly after installation, there’s a higher likelihood that incorrect installation techniques were used. On the other hand, if issues arise years later, it may point toward a manufacturing defect.

Consult with roofing professionals who have experience in identifying these types of problems. They will have expertise in distinguishing between defects and installation errors based on their knowledge and industry standards.

Additionally, gather any documentation related to your roof warranty and installation process. This information will help support your case when filing a warranty claim.

Remember that accurately determining the cause is crucial for making successful warranty claims. By following these steps and seeking professional guidance where needed, you can increase your chances of resolving roofing issues effectively.

Types of Roofing Warranties

Roofing warranties come in various forms, each offering different levels of protection and coverage for your roofing system. Understanding these types of warranties can help you make informed decisions when it comes to safeguarding your investment in your roof. Here are some of the most common types of roofing warranties:

  1.     Manufacturer’s Warranty:
  •       Coverage: Manufacturer’s warranties primarily cover defects in the roofing materials that result from flaws in the manufacturing process. These defects may include issues like shingle delamination, premature granule loss, or other material-related problems.
  •       Duration: Manufacturer’s warranties typically have varying durations, with coverage periods that can range from 10 to 50 years, or even a lifetime, depending on the roofing material and manufacturer.
  •       Proration: Some manufacturer’s warranties are prorated, meaning the coverage decreases over time. For example, if you have a 50-year warranty, the warranty may only cover a percentage of replacement costs after a certain number of years.
  1.     Contractor’s Warranty:
  •       Coverage: Contractor’s warranties focus on the installation of the roofing system and workmanship. They cover issues that arise from errors or problems during the installation process.
  •       Duration: Contractor’s warranties typically have shorter durations compared to manufacturer’s warranties. They often range from 1 to 10 years, depending on the contractor and the terms of the agreement.
  •       Non-Proration: Contractor’s warranties usually do not prorate. This means that you have full coverage for the specified duration of the warranty.
  1.     System Warranty:
  •       Coverage: A system warranty combines both the manufacturer’s warranty for roofing materials and the contractor’s warranty for workmanship into a single comprehensive warranty. This provides homeowners with seamless protection for both material defects and installation issues.
  •       Duration: System warranties often mirror the manufacturer’s warranty duration, with additional coverage for workmanship that aligns with the contractor’s warranty terms.
  1.     Extended or Enhanced Warranty:
  •       Coverage: Extended warranties offer coverage beyond the standard manufacturer’s warranty. They may include extra protection against specific issues, such as wind damage, algae resistance, or other roofing concerns.
  •       Duration: The duration of extended warranties can vary widely, but they often extend coverage beyond the initial years of the manufacturer’s warranty.
  1.     Prorated vs. Non-Prorated Warranties:
  •       Prorated: Prorated warranties gradually reduce their coverage over time. For example, a 50-year warranty may prorate after 25 years, reducing the coverage to a certain percentage of the replacement cost.
  •       Non-Prorated: Non-prorated warranties maintain consistent coverage throughout the entire duration of the warranty. This means you have the same level of protection from day one until the end of the warranty period.
  1.     Transferable Warranty:
  •       Coverage: Some warranties are transferable, allowing you to transfer the remaining warranty to a new homeowner if you sell your property. This can enhance the resale value of your home.
  •       Terms: Transferable warranties often come with specific terms and conditions, and the new homeowner must follow certain procedures to complete the transfer.
  1.     Wind and Hail Warranties:
  •       Coverage: Wind and hail warranties focus on protecting your roof from damage caused by these specific weather elements. They offer coverage for repair or replacement if your roof sustains damage from high winds or hailstorms.

Understanding the various types of roofing warranties is essential for homeowners. Each warranty type has its own terms, coverage limits, and duration, so it’s crucial to choose the one that best suits your needs and offers the most comprehensive protection for your roofing investment. Roofing warranties provide the peace of mind that your roof is covered in case of unexpected problems or defects, ensuring the long-term durability and performance of your roofing system.

Important Things to Avoid When Purchasing a Warranty

Common ThingsAvoidance
Assuming All Warranties Are the SameReview and compare the terms of each warranty carefully.
Overlooking ProrationUnderstand the implications of prorated warranties, and consider non-prorated options.
Ignoring TransferabilityIf resale is in your future, choose a transferable warranty and follow transfer procedures.
Not Reading the Fine PrintCarefully read and understand all terms, conditions, and limitations in the warranty.
Not Verifying Contractor CredentialsEnsure your contractor is reputable, certified, and authorized by the manufacturer.
Falling for “Lifetime” GuaranteesVerify what a “lifetime” warranty truly covers and its limitations.
Assuming Wind and Hail Are Always CoveredConfirm if wind and hail damage have specific coverage in your warranty.
Not Maintaining Your RoofFollow the maintenance requirements specified in your warranty to maintain coverage.
Relying Solely on the Installation PriceConsider the value and trustworthiness of the warranty in addition to the cost.
Assuming Coverage for All Types of DamageUnderstand the specific defects or issues covered by the warranty.

What are Possible manufacturer’s defects? Possible Manufacturer’s Defects in Roofing Shingles

When it comes to roofing shingle warranty claims, understanding possible manufacturer’s defects is crucial. These defects can lead to premature failure of your roof and may entitle you to a warranty replacement or repair.

One common defect is blistering, which occurs when air or moisture becomes trapped between the layers of the shingle. This can cause the shingle to expand and bubble, compromising its integrity.

Curling is another defect that often arises. This happens when the corners or edges of the shingles start to turn upwards, exposing them to potential damage from wind and water.

Faulty sealing strips are yet another concern. The adhesive strips on the back of each shingle are designed to bond together during installation for added protection against leaks. If these strips fail to adhere properly, water infiltration can occur.

Additionally, granule loss is a problem seen in defective shingles. Granules serve as a protective layer against UV rays and help with fire resistance. If they start coming off prematurely, it indicates poor-quality manufacturing.

Improper nailing patterns or errors in installation can also be considered manufacturer’s defects if they contribute significantly to the early deterioration of the roof system.

By familiarizing yourself with potential manufacturer’s defects like blistering, curling, faulty sealing strips, granule loss, and improper nailing patterns during your warranty claim process, you’ll have a better chance at identifying whether your roofing issues are due to such defects rather than other factors like improper installation or external damage.

Types of Roofing Warranties


Roofing warranties are legally binding agreements between homeowners and either the manufacturer of the roofing materials, the roofing contractor, or both. These warranties provide assurances and protection for homeowners in the event that their roofing system experiences problems or defects. Roofing warranties are essential because they offer a layer of security for a significant investment – your roof.

Manufacturer’s Warranty: The manufacturer’s warranty is a critical component of roofing warranties. It typically covers defects in the roofing materials caused by flaws in the manufacturing process. If the shingles or roofing materials have issues directly linked to how they were made, the manufacturer’s warranty steps in to cover these problems. However, it’s important to understand that manufacturer’s warranties often do not extend to issues stemming from the installation process. These warranties typically cover the costs of the materials themselves but not the labor, removal, disposal, or other additional expenses associated with addressing roofing problems.

Contractor’s Warranty: In addition to the manufacturer’s warranty, many reputable roofing contractors provide their own warranties. The contractor’s warranty covers the installation process and the quality of workmanship. If there are issues with how the roofing materials were installed or if workmanship problems emerge, the contractor’s warranty can be invaluable. This warranty provides homeowners with the assurance that their roof was installed correctly and that any issues arising from the installation process will be addressed.

Comprehensive Protection: The ideal scenario for homeowners is to have both the manufacturer’s and contractor’s warranties working in harmony. This means that you are protected from both manufacturing defects and installation issues. Having comprehensive protection ensures that your investment in a new roof is safeguarded from potential problems, offering peace of mind and financial security.

Roofing warranties are not one-size-fits-all. Their terms and conditions can vary, so it’s crucial for homeowners to thoroughly understand what is covered and what is not. While a warranty can provide vital protection, it’s only effective when it addresses the specific issues that might arise. Understanding the different components of roofing warranties, such as the manufacturer’s and contractor’s warranties, is key to making informed decisions about your roof’s protection. These warranties act as safeguards, offering financial security and peace of mind for homeowners who want to ensure the longevity and integrity of their roofing system.

How To Protect Your Warranty

Protecting your warranty is crucial to ensuring that any potential issues with your roof are covered by the manufacturer. Here are some important steps you can take to protect your warranty:

  1. Read and understand the warranty terms: Take the time to thoroughly read and understand the details of your roofing warranty. Each manufacturer may have different requirements and exclusions, so it’s important to know what is covered and what isn’t.
  2. Regular maintenance: Proper maintenance plays a key role in protecting your warranty. Follow any recommended maintenance guidelines provided by the manufacturer, such as regularly inspecting for damage or debris buildup, cleaning gutters, and trimming overhanging tree branches.
  3. Hire professional installers: When installing or repairing your roof, always hire experienced professionals who are certified by the shingle manufacturer. This ensures that installation is done correctly according to the manufacturer’s specifications.
  4. Keep records of repairs and inspections: Document all repairs, inspections, and maintenance performed on your roof. This includes keeping receipts for materials used or services rendered.
  5. Address issues promptly: If you notice any problems with your roof, such as leaks or missing shingles, address them promptly before they escalate into bigger issues that could void your warranty.

By following these steps, you can help protect your roofing warranty and ensure that any potential claims will be honored by the manufacturer should an issue arise in the future.

The Importance of Clearly Defined Warranties

When it comes to roofing warranties, one of the most important aspects is having a clearly defined warranty. This ensures that both the homeowner and the manufacturer are on the same page regarding what is covered and what is not. Without clear definitions, disputes can arise, leading to frustration for everyone involved.

A well-defined warranty outlines specific terms and conditions, including coverage limitations, duration of coverage, and any exclusions or exceptions. By clearly stating these details upfront, homeowners can have peace of mind knowing exactly what they are entitled to if an issue arises with their shingles.

Additionally, a clearly defined warranty also protects manufacturers by setting expectations for homeowners. It helps prevent misunderstandings or false claims from customers who may try to hold manufacturers accountable for issues outside the scope of the warranty.

Having a documented agreement between both parties provides transparency and accountability in case any disputes need resolution. It serves as a reference point that eliminates confusion and minimizes disagreements.

Having a clearly defined warranty is crucial in ensuring that both homeowners and manufacturers understand their rights and responsibilities when it comes to roof shingle warranties. It promotes fairness, and transparency, and ultimately leads to smoother claim processes should any problems occur down the line.


The conclusion of this blog post is not about wrapping up the information or summarizing what has been discussed. Instead, it serves as a reminder that understanding and following the proper procedures for ordering roof measurements is essential when filing shingle warranty claims.

By knowing how to order accurate roof measurements, homeowners can provide detailed information to their insurance company or roofing manufacturer, ensuring a smooth and efficient claims process. This includes identifying defective shingles and determining if the issue was caused by a manufacturer’s defect or improper installation.

It’s important to be aware of possible manufacturer defects that may be covered under your roofing warranty. Familiarize yourself with the different types of warranties available so you can protect your investment and ensure any necessary repairs are covered.

Remember, clearly defined warranties are crucial in protecting yourself as a homeowner. Take the time to read and understand all terms and conditions before purchasing shingles or making any warranty claims.

Ordering accurate roof measurements is vital when dealing with shingle warranty claims. By following proper procedures, identifying defects, determining causes, and being knowledgeable about warranties, homeowners can navigate through the process smoothly while protecting their investment in their home’s roof system.

Hello Everyone, How did you like this How to Order Roof Measurements for Shingle Warrant Claims, if you like this article, share your view in the comment box, and don’t forget to share it with your friends on social media so they can also read it. For more, keep visiting

Related Blogs:-

Frequently Asked Questions (FAQs)

  1. How can I order roof measurements for shingle warranty claims?

To order roof measurements for shingle warranty claims, you can contact a professional roofing measurement service provider. They will use advanced technology and satellite imagery to accurately measure your roof and provide you with the necessary reports for your warranty claim.

  1. What are premium report details?

Premium report details refer to the comprehensive information provided in a professional roof measurement report. These details include accurate measurements of the roof area, pitch, slopes, ridge lines, valleys, and other relevant data that are crucial when filing a shingle warranty claim.

  1. Where and how should I report a failing roof covered under warranty?

If you notice any issues with your roof that may be covered under warranty, it’s important to first consult the documentation provided by the manufacturer or installer. This will outline the specific procedures for reporting such problems. Typically, you will need to contact either the manufacturer or the installer directly to initiate your warranty claim.

  1. How can I identify defective shingles on my roof?

Identifying defective shingles requires careful inspection of your roof’s surface. Look out for signs such as curling edges, cracking or splitting surfaces, missing granules or bald spots on individual shingles, or consistent wear across multiple shingles in certain areas of your roof.

  1. How do I determine if the problem was caused by a manufacturer’s defect or improper installation?

Determining whether an issue is due to a manufacturer’s defect or improper installation often requires expert evaluation from qualified professionals who specialize in roofing inspections and repairs.

  1. What types of defects might be covered under roofing warranties?

Roofing warranties typically cover defects such as premature aging of materials like cracked or brittle shingles; manufacturing flaws resulting in leaks; excessive granule loss leading to reduced protection against UV rays; blistering caused by trapped moisture within layers; inadequate adhesion between layers causing wind uplift; and other similar issues that arise from the manufacturing process.